UK plug safety

What makes a safe UK plug? 13A fuse & BS 1363, explained.

Three markings tell you a plug is genuinely built for the UK.
BS 1363 on the plug · ASTA 13A fuse to BS 1362 · UKCA & CE on the box.
Check all three in ten seconds.

● On the plug
BS 1363/A moulded in

The standard is part of the plug body, never a sticker.

● Inside the plug
ASTA 13A fuse, BS 1362

The certification is printed on the fuse itself.

● On the box
UKCA · CE · 13A 250V~

Full rating printed: 3250W maximum load.

Macro photograph of the 13A cartridge fuse inside a PARTH UK plug, marked ASTA certified to BS 1362 standard
The fuse in every PARTH lead, marked ASTA 13A B.S.1362 - readable with the naked eye.

What BS 1363 actually covers

BS 1363 is the British Standard for the UK 13A flat-pin system: part 1 the plug, part 2 the socket, part 3 adaptors and extension leads. It defines pin dimensions, shutter geometry, the temperature the plug must survive, and the fuse carrier design. A plug marked BS 1363/A has been built and tested to the full standard - not just shaped like a UK plug. The 13A fuse inside is governed by its own standard, BS 1362: if a fault develops, it breaks the circuit before the cable can overheat.

Check any plug in ten seconds

✓ What you want to see
  • BS 1363 or BS 1363/A moulded into the plug
  • Fuse marked BS 1362 with ASTA certification
  • UKCA & CE on packaging with 13A 250V~ rating
✗ Warning signs
  • Blank plug faces, no visible standard
  • Unmarked fuse or fixed rating sticker
  • Packaging with no electrical rating at all
PARTH extension lead packaging showing UKCA and CE certification marks with 13A 250V 3250W rating and BS 1363/A compliance
PARTH packaging: UKCA, CE, BS 1363/A and the full 13A 250V~ 3250W rating.
PARTH UK Type G plug with BS 1363/A marking moulded into the body
The plug face: BS 1363/A moulded in, no stickers anywhere.

Why it matters

A plug that only looks British can fit a UK socket yet fail on pin geometry, shutter interaction, fuse performance and heat resistance. The markings exist so you do not have to take the seller's word for it - a safety claim you cannot check is not a safety claim.

Every PARTH lead carries this plug

2 sockets · 3M
3022 White Extension Lead

Desk companion with the same fused BS 1363/A plug.

View product ›
PARTH 3022 2-socket 3m white extension lead
5 sockets · 3M
3025 White Extension Lead

Five switched sockets for family rooms.

View product ›
PARTH 3025 5-socket 3m white extension lead
6 sockets · 3M
3026 White Extension Lead

Six switched sockets for full home-office setups.

View product ›
PARTH 3026 6-socket 3m white extension lead

We test to the same standard you just read about

  • Every PARTH switched socket is type-tested to BS 1363-2:2016 — a 45-page Intertek report (22050477HKG-001, May 2023) with every clause passed.
  • Plug: ASTA Licence 1457. Cable: 1.25mm² H05VV-F, BSi VC 720445.
  • Earth continuity measured at ≤7.1mΩ against a 50mΩ limit. UKCA & CE EMC verifications cover the whole range.

See the full test data ›

Common questions.

What does 13A fused plug mean?

It means the plug contains a 13-amp cartridge fuse to BS 1362 - the maximum rating for UK extension leads. The fuse breaks the circuit if current exceeds its rating, protecting the cable and connected devices.

Are PARTH extension leads certified for UK use?

Yes. BS 1363/A plug, ASTA-certified BS 1362 fuse, UKCA and CE packaging marked 13A 250V~ / 3250W, and shuttered sockets in line with BS 1363-2.

Can I replace the fuse with any 13A fuse?

Only like for like: a 13A fuse marked BS 1362. Fuses without the marking may not break at the specified current.

What is the difference between BS 1363 and BS 1362?

BS 1363 governs the plug and socket system; BS 1362 governs the cartridge fuse inside. A safe UK lead needs both.

Keep reading

Every layer of the lead is opened up in what's inside an extension lead, or compare the PARTH range.