Buying guide
10M Extension Lead: Long-Reach Power Done Safely
Sometimes the wall socket is simply far from where the power is needed. This guide explains when a 10M extension lead is the right answer, why one compliant long lead beats joining two shorter ones, and how the PARTH 3026-10M fits long UK room layouts.
Quick answer
Choose a 10M extension lead when the only wall socket is genuinely far away — a loft office, garage workshop or long living room. One compliant 10M lead with a 13A fused UK plug and a 3250W rating is the safe route; never plug two shorter leads together to reach, which is a known fire risk.
When ten metres makes sense
Walk the route the cable will actually take, from the wall socket to the farthest device. If it is over five metres — around a doorway, along two walls, up to a loft conversion or out to a garden-room study — a 10M lead covers it in one run. For shorter routes, a 2M, 3M or 5M lead is easier to keep tidy and costs less.
Why not just join two shorter leads?
Daisy-chaining extension leads — plugging one into another — multiplies connection points, makes overload easy and is a recognised fire risk. Every join also adds a point that can work loose behind furniture where nobody notices. One 10M lead built to the same standard as the rest of the PARTH range — 13A fused UK Type G plug, individual switches, surge and overload protection — does the job with a single compliant connection to the wall.
The PARTH 3026-10M
The PARTH 3026-10M is a 10 metre white 6-socket extension lead with individual switches and LED indicators. It carries a 3250W rated load on a 13A fused UK Type G plug and includes surge protection, overload protection and child-resistant safety shutters — the same specification as the rest of the range, in the longest reach PARTH makes.
Routing a long lead safely
- Take the most direct practical route from the wall socket, along walls rather than across walkways.
- Keep the lead visible, dry and uncovered — never under carpets, rugs or insulation.
- Fully unwind any reel-style lead before use.
- Keep the total load of everything running together within the 3250W, 13A maximum rating.
Same standard on every PARTH lead.
Whatever you plug in, four features do the quiet work:
Safety shutters
Child-resistant shutters guard every outlet, so curious fingers, dust and stray paperclips stay on the outside.
Overload protection
Misjudged the load? Overload protection cuts the power before anything gets stressed.
Individual switches
One switch per outlet — turn a single device off without unplugging, or take the whole board dark in one tap.
LED indicators
A light per switch shows which outlets are live at a glance.
Questions
Common questions.
When is a 10M extension lead the right choice?
When the wall socket is genuinely far from the setup: a loft office, garage workshop, long living room or a room where the only socket is on the opposite wall. A 10M lead reaches that distance in one compliant run instead of stretching or adding extensions.
Is one 10M lead safer than joining two shorter leads?
Yes. Plugging one extension lead into another (daisy-chaining) is a known fire risk and should never be done. A single 10M lead built to the same standard — 13A fused plug, 3250W rating, surge and overload protection — replaces that chain with one compliant run.
Does a longer cable lose power?
A longer cable has slightly more resistance, but a compliant 10M extension lead is rated to deliver its full 3250W, 13A maximum within normal UK domestic use. The safety rules stay the same: keep the total load of connected appliances within the rating.
What can I safely run on the PARTH 10M lead?
The PARTH 3026-10M is a 6-socket white lead with individual switches, a 13A fused UK Type G plug and a 3250W rated load. It suits long-reach room layouts for everyday electronics — computers, TVs, chargers, lamps — used within the total rating, indoors.