Kitchen safety
What can you plug into a kitchen extension lead?
Kettles, air fryers and washing machines belong in the wall. The radio, charger and speaker can share. Check anything in two taps.

Under 60W together. Plug in and forget.
Around 1000W each. Fine alone, never stacked.
1500W to 3000W. Too much to share.
Check your combination
Tap what runs at the same time. The bar shows how close you are to 3250W.
The worktop-safe choice
Five switched outlets. Surge and overload protection. Child-safe shutters. Set up once, stop thinking about it.
Four rules that keep kitchens safe
- Add up before you plug in. Keep everything running together under 3250W.
- Heating appliances go in the wall. Kettle, air fryer, washing machine — never on a lead.
- Never daisy-chain. One extension lead into another is a fire risk, whatever the wattage.
- Keep it dry and visible. Away from the sink, uncovered, out from behind appliances.
Same standard on every PARTH lead.
Whatever you plug in, four features do the quiet work:
Safety shutters
Child-resistant shutters guard every outlet, so curious fingers, dust and stray paperclips stay on the outside.
Overload protection
Misjudged the load? Overload protection cuts the power before anything gets stressed.
Individual switches
One switch per outlet — turn a single device off without unplugging, or take the whole board dark in one tap.
LED indicators
A light per switch shows which outlets are live at a glance.
Questions
Common questions.
Can I use an extension lead in the kitchen?
Yes, for the low-power side of kitchen life: a radio, phone charger, smart speaker or a blender in short bursts. Heating appliances — kettle, air fryer, washing machine — should plug directly into the wall socket, because their draw is too high to share safely.
Can I plug a kettle into an extension lead?
We do not recommend it. A kettle draws close to 3000W, which nearly maxes out a 3250W rated lead on its own. Kettles, air fryers and washing appliances belong in the wall socket — if you need power in a new spot, ask an electrician about adding a socket.
How many watts is a standard UK extension lead?
Every PARTH extension lead is rated at 3250W with a 13A maximum current, protected by a 13A fuse in the UK Type G plug. This is the standard rating for quality UK domestic extension leads.
What happens if I overload an extension lead?
Overloading causes cables and connections to overheat, which can melt plugs and start fires. PARTH leads include overload protection that cuts power when the limit is exceeded, but protection should never be relied on as a routine — keep the total load within the rating in the first place.