UK plug safety
What makes a safe UK plug? 13A fuse & BS 1363, explained.
Three markings tell you a plug is genuinely built for the UK.
BS 1363 on the plug · ASTA 13A fuse to BS 1362 · UKCA & CE on the box.
Check all three in ten seconds.
The standard is part of the plug body, never a sticker.
The certification is printed on the fuse itself.
Full rating printed: 3250W maximum load.

What BS 1363 actually covers
BS 1363 is the British Standard for the UK 13A flat-pin system: part 1 the plug, part 2 the socket, part 3 adaptors and extension leads. It defines pin dimensions, shutter geometry, the temperature the plug must survive, and the fuse carrier design. A plug marked BS 1363/A has been built and tested to the full standard - not just shaped like a UK plug. The 13A fuse inside is governed by its own standard, BS 1362: if a fault develops, it breaks the circuit before the cable can overheat.
Check any plug in ten seconds
- BS 1363 or BS 1363/A moulded into the plug
- Fuse marked BS 1362 with ASTA certification
- UKCA & CE on packaging with 13A 250V~ rating
- Blank plug faces, no visible standard
- Unmarked fuse or fixed rating sticker
- Packaging with no electrical rating at all


Why it matters
A plug that only looks British can fit a UK socket yet fail on pin geometry, shutter interaction, fuse performance and heat resistance. The markings exist so you do not have to take the seller's word for it - a safety claim you cannot check is not a safety claim.
Every PARTH lead carries this plug
We test to the same standard you just read about
- Every PARTH switched socket is type-tested to BS 1363-2:2016 — a 45-page Intertek report (22050477HKG-001, May 2023) with every clause passed.
- Plug: ASTA Licence 1457. Cable: 1.25mm² H05VV-F, BSi VC 720445.
- Earth continuity measured at ≤7.1mΩ against a 50mΩ limit. UKCA & CE EMC verifications cover the whole range.
Common questions.
What does 13A fused plug mean?
It means the plug contains a 13-amp cartridge fuse to BS 1362 - the maximum rating for UK extension leads. The fuse breaks the circuit if current exceeds its rating, protecting the cable and connected devices.
Are PARTH extension leads certified for UK use?
Yes. BS 1363/A plug, ASTA-certified BS 1362 fuse, UKCA and CE packaging marked 13A 250V~ / 3250W, and shuttered sockets in line with BS 1363-2.
Can I replace the fuse with any 13A fuse?
Only like for like: a 13A fuse marked BS 1362. Fuses without the marking may not break at the specified current.
What is the difference between BS 1363 and BS 1362?
BS 1363 governs the plug and socket system; BS 1362 governs the cartridge fuse inside. A safe UK lead needs both.
Keep reading
Every layer of the lead is opened up in what's inside an extension lead, or compare the PARTH range.