Christmas safety guide
Can You Use an Extension Lead for Outdoor Christmas Lights? (UK Safety Guide)
Yes — but only with the right setup. The lights must be rated for outdoor use, the extension lead itself stays inside, and the cable exit needs care. Here is the safe arrangement, what the IP rating on the box means, and how much power your display really draws.
Quick answer
You can run outdoor Christmas lights from an extension lead, but the lead itself must stay on the dry, indoor side of the wall. Use light strings marked IP44 or "for outdoor use", keep every plug connection off the ground and out of puddles, and never pinch the cable through a window or door gap — a crushed cable is a fire risk. The most robust option is a dedicated outdoor socket, but a single good lead through a dedicated cable exit works well for most UK homes.

Why the extension lead itself can't go outside
Every electrical product carries an IP rating — two digits that spell out how well it keeps out solids and water. A standard indoor extension lead has no IP rating at all: its sockets, switches and seams are designed for dry rooms. Rain, condensation or even a splash from wet grass can reach live parts inside.
- IP44 — the minimum for outdoor Christmas lights: protected against splashing water from any direction.
- IP65 and up — protected against jets of water; the better choice for exposed walls and open gardens.
- No IP marking — indoor only. This applies to the light string, the lead and every connector in the run.
That is why the safe arrangement keeps the extension lead indoors: it does the length and the switching, while the outdoor-rated string does the weathering.
The safe setup, in four steps
- Check the light string is marked IP44 or "for outdoor use" — the box or the tag near the plug, moulded into the cable.
- Plug the string into a single extension lead, indoors. One lead is enough — never chain two together, and keep the total load within the lead's rating.
- Route the cable through a dedicated exit: a slightly open window with the cable resting in the frame gap is common, but never crush it shut — use a window cable protector or a wall-mounted outdoor socket if the run is permanent.
- Keep every connection off the ground. Plugs and sockets hang or sit high, out of puddles, planters and snow build-up.
Three things never to do: never leave an indoor-only lead or plug outside, never run cables under doors or through closing windows where the insulation can be crushed, and never join two leads together to reach further — move the lead, not the chain.
How much power do Christmas lights actually use?
Far less than most people expect — LED strings changed the maths completely:
- A modern 100-LED string draws roughly 5–10 watts — about as much as a phone charger.
- Ten such strings together still sit under 100 watts, while a single extension lead is rated to 13A — 3,250 watts.
- Old incandescent sets are the exception: a 40W set draws as much as eight LED strings, so check the tag if your decorations pre-date LED.
Run our numbers for your own display: How many Christmas lights can one extension lead run? ›
A closer look: reaching the garden from one socket
Outdoor runs live or die on cable length — the far side of the front garden is a long way from the nearest socket. A long-reach lead lets one indoor socket feed the whole display without joining leads.
6 switched outlets
The long-reach lead for window-to-garden runs — BS 1363 fused plug, individually switched outlets, 13A 3250W rating.
Like every PARTH lead, it is type-tested to BS 1363-2 by Intertek (report no. 22050477HKG-001) and carries UKCA & CE certification. See the certificates ›
Same standard on every PARTH lead.
Whatever you plug in, four features do the quiet work:
Safety shutters
Child-resistant shutters guard every outlet, so curious fingers, dust and stray paperclips stay on the outside.
Overload protection
Misjudged the load? Overload protection cuts the power before anything gets stressed.
Individual switches
One switch per outlet — turn a single device off without unplugging, or take the whole board dark in one tap.
LED indicators
A light per switch shows which outlets are live at a glance.
Questions
Common questions.
Can I use an indoor extension lead for outdoor Christmas lights?
Yes, as long as the lead itself stays on the dry, indoor side of the wall and the light string is marked IP44 or "for outdoor use". The lead, its sockets and every connector must never be left outside where rain or splashes can reach them.
Do outdoor Christmas lights use a lot of electricity?
Modern LED strings are very light on power — a 100-LED set draws roughly 5–10 watts, about the same as a phone charger. Ten strings together stay under 100 watts, well within a single 13A (3,250W) extension lead.
What does IP44 mean on Christmas lights?
IP44 is the minimum weather protection for outdoor lights: protected against solid objects over 1mm and against splashing water from any direction. For exposed walls and open gardens, IP65 or higher is the better choice.
Is it safe to leave outdoor Christmas lights on overnight?
With LED strings, a correctly rated setup and no damaged cables, leaving them on overnight is common practice. An outdoor timer makes it safer still — and check cables and connections for damage at setup, after storms, and monthly.